With the development of automation and intelligence, many enterprises also pay more and more attention to the automatic processing of raw materials. Therefore, the central material supply system is not unfamiliar to most injection molding enterprises. It is the most used automation equipment in the plastic industry, which has brought many benefits to the plastic products industry. It can realize the automatic production of the whole workshop and improve the production efficiency. The central feeding system is easy to operate, and only a few people can control the feeding demand of the whole injection molding plant, thus reducing a lot of labor costs. What is the design process of the central feeding system? The following is a short series of aoshide to introduce you.

Design process of central feeding system:

1. Touch screen, boundary panel, color panel.

2. Alarm lamp and buzzer.

Central feeding system

3. Various feeding parameters can be set.

4. Programmable controller.

5. It has memory function.

6. There are full material and lack of material display and alarm.

7. Overload display and protection.

8. And can display faults.

9. Adjustment and setting of suction display and suction time.

10. Display the suction action of each injection molding machine and the central feed hopper.

The above content is an introduction to the design process of the central feeding system. As a large mechanical equipment, the central feeding system saves energy and has remarkable economic benefits. After the operation of the central feeding system, check whether the fastening bolts are firm and the wear degree of the easily worn parts. In daily work, it is also necessary to regularly repair and maintain the central feeding system to avoid failure of the central feeding system. Correct maintenance can well stabilize the service performance of the equipment, avoid failure, prolong the service life and reduce the maintenance cost of the enterprise.