\"One to many\" separated vacuum suction machine has powerful function, simple operation and convenient installation. It can be equipped with two to twelve vacuum hoppers, which is suitable for plastic raw material processing places such as multiple dehumidification dryers (such as two in one odd) or separate weighing mixer OGB. It can also be used to transport one to two, one to three or one to many (one to twelve at most), which can save a lot of cost.
189-4860-6110 / 0769-82020256 Online consultationNaming principles
OAL- xxxS - xx
① ② ③
① Aoshide automatic suction machine
② Motor power
S stands for separated
③ 122 indicates one to two feeding, and 12x indicates one to many feeding
Product features
1. One to two / multi feeding, greatly saving cost
2. Cyclone design, cyclone baffle and separation dust bucket are equipped under the filter, which can reduce the load of the filter and effectively reduce the dust content
3. Separate dust collecting bucket for easy dust removal
4. Multiple safety protection functions, such as material shortage alarm and motor overload alarm
Options
The collecting hopper och-6 / 12 / 24 is divided into standard type and insulation type, two material proportional valve, automatic cleaning function of pressure storage tank and alarm
Scope of application
"One to many" separated vacuum suction machine has powerful function, simple operation and convenient installation. It can be equipped with two to twelve vacuum hoppers, which is suitable for plastic raw material processing places such as multiple dehumidification dryers (such as two in one odd) or separate weighing mixer OGB. It can also be used to transport one to two, one to three or one to many (one to twelve at most), which can save a lot of cost.
working principle
The control device starts the vacuum motor to extract the air in the hopper, and closes the blanking valve device to generate negative pressure in the hopper. Under the action of negative pressure, external materials are carried into the hopper by air flow through the conveying pipe. When the feeding time is over, the vacuum motor stops working, the valve of the internal blanking valve device is pushed open by the raw materials, and the materials flow out of the hopper into the molding machine or other equipment.
technical parameter
| model | Motor power | Conveying capacity (kg/hr) | Motor form | Vertical conveying height (m) | Horizontal conveying length (m) | Storage hopper capacity | |
| kw | hp | ||||||
| OAL-3S-122 | 2.25 | 3 | 420 | Inductive | 9.5 | 30 | 7.5L * 2 |
| OAL-5S-123 | 3.75 | 5 | 520 | Inductive | 11 | 50 | 7.5L * 3 |
| OAL-7.5S-124 | 5.5 | 7.5 | 850 | Inductive | 13 | 75 | 12L * 4 |
| OAL-10S-12X | 7.5 | 10 | 1000 | Inductive | 15 | 100 | 24L * X |
Product parameters are subject to change without notice.
Note:
(1) The hopper capacity is calculated based on plastic raw materials with bulk density of 0.65kg/l and diameter of 3 ~ 5mm
(2) Machine voltage specification: 3 ф, 400VAC, 50Hz
Follow us
