Naming principles

OAL- xxx - xx

①   ②   ③

① Aoshide automatic suction machine

② Motor power

③ Note

P: With photoelectric hopper

Product features

1. Oal series direct suction machine adopts carbon brush motor with high speed and large air volume

2. Small space and easy installation

3. Wire controlled controller, easy to use, and can be equipped with automatic cleaning function

4. The hopper and base can be adjusted in multiple directions

5. Micro switch is adopted, with sensitive induction and stable quality

6. A handle hopper cover is provided to facilitate the cleaning of the filter screen and refueling

7. Multiple safety protection functions, such as material shortage alarm

8. Completely avoid the trouble and danger of manual feeding, save labor and improve work efficiency

Options

The collecting hopper och-6 / 12 / 24 is divided into standard type and insulation type, two material proportional valve, automatic cleaning function of pressure storage tank and alarm

working principle

The control device starts the vacuum motor to extract the air in the hopper, and closes the blanking valve device to generate negative pressure in the hopper. Under the action of negative pressure, external materials are carried into the hopper by air flow through the conveying pipe. When the feeding time is over, the vacuum motor stops working, the valve of the internal blanking valve device is pushed open by the raw materials, and the materials flow out of the hopper into the molding machine or other equipment.

technical parameter

Product parameters are subject to change without notice.

Note:

(1) The hopper capacity is calculated based on plastic raw materials with bulk density of 0.65kg/l and diameter of 3 ~ 5mm

(2) Machine voltage specification: 1 ф,  230VAC, 50Hz